• Product Range
    Product Range
    Ecoflex
ECOFLEX®

NON-ASBESTOS JOINTING SHEETS

Sheets and seals in non-asbestos jointing sheets ECOFLEX® with a very high seal strength.

Asbestos-free ECOFLEX® joint sheets, are pre-pressed laminates used for the manufacture of seals for piping and pressure equipment. They ensure effective sealing in an extremely wide range of application and conditions. They are composed of high tenacity synthetic fibers, inorganic fillers and elastomeric binders, which through calendering and vulcanization are pre-formed in the shape of a sheet. The different types of ECOFLEX® joint sheets stand out for their components and their mixing, which make each type suitable for different applications.

The fibers are the most important component: they must have high elasticity and high mechanical strength, thermal and chemical stability, as well as a good cohesiveness with the other components. There are various types of fibers, for example:

  • Aramid fibers: they give high thermal, chemical and mechanical resistance; however, this structure is subject to the attachment of water vapor or strong acids and bases, in the presence of which the preservation of the integrity of the seal is entrusted to the screen provided by the elastomeric matrix (effective within low temperature ranges);
  • Glass fibers: they are thermally stable but have little flexibility, so they are only used in couple with aramid fibers in oder to make joints with high temperature resistance and hydrolysis vapor action;
  • Carbon fibers: they are used in some fine joints, as they have excellent chemical resistance, particularly with strong alkaline substances; Likewise, thanks to the excellent thermal stability, they allow the gasket to maintain a good sealability even in the event of fire.

Ecoflex

RANGE OF ECOFLEX JOINT SHEETS
TYPE
FIBERCEL
Code
5100
Color
Light Green
Base Components
NBR - Cellulose, Mineral Fiber
Application
Water, Steam, Oils, Solvents (No Chlorinated Aromatic)
T. MAX.*
180°C
P. MAX*
40 atm
TYPE
IDROFLEX
Code
5200
Color
Green / Blue
Base Components
NBR - Cellulose, Mineral Fiber, Aramid Fiber
Application
Water, Steam, Oils, Solvents (No Chlorinated Aromatic)
T. MAX.*
250°C
P. MAX*
40 atm
TYPE
VAPORFLEX
Code
5300
Color
Red
Base Components
NBR - Aramid Fiber, Mineral Fiber
Application
Water, Steam, Oils, Solvents (No Chlorinated Aromatic), Refrigerants, Slightly Acid or Alkaline Solutions
T. MAX.*
300°C
P. MAX*
50 atm
TYPE
OIL/SA
Code
5400
Color
Green
Base Components
NBR - Aramid Fiber, Mineral Fiber
Application
Oils, Fats, Petrol, Aliphatic Hydrocarbons, Distilled Water, Freon, Natural Gas
T. MAX.*
300°C
P. MAX*
70 atm
TYPE
ACID/SA
Code
5500
Color
Black / Gray
Base Components
EPDM - Carbon Fiber, Mineral Fiber, Aramid Fiber
Application
Acids, Alkali, Alcohol
T. MAX.*
300°C
P. MAX*
40 atm
TYPE
UNIVERSAL/SA
Code
5600
Color
Blue
Base Components
NBR - Aramid Fiber, Mineral Fiber
Application
Alcohol, Petrol, Natural Gas, City Gases, Aliphatic Hydrocarbons, Freon, Medium Concentrated Acids
T. MAX.*
350°C
P. MAX*
100 atm
TYPE
UNICARBO
Code
5700
Color
Black
Base Components
NBR - Aramid Fiber, Lamellar Graphite
Application
Saturated Steam, Mineral Oils, Alkali, Freon, Alcohol, Solvents (No Chlorinated Aromatic)
T. MAX.*
370°C
P. MAX*
100 atm
TYPE
CARBOTECH
Code
5800
Color
Black
Base Components
NBR - Carbon Fiber, Aramid Fiber
Application
Saturated Steam, Mineral Oils, Natural Gas, Alcohol / Ethers, Petrol, Solvents, Medium Concentrated Acids
T. MAX.*
450°C
P. MAX*
100 atm
Upon request with reinforced mesh INOX
type MOTOR 5800RI
Surface finishes available: Anti-stick treatment on both standard sides on most types
Sheet Size: Standard dimensions: 1500 x 1500 mm
On request: 1500 x 3000, 1500 x 4500, 2000 x 4000 mm
Thickness: 0,3 ÷ 5 mm
PTFE, graphite or silicon treatment available on request
(*) NB: The limits of temperature and operating pressure cannot be considered simultaneously. They also depend on a variety of factors (joints, dimensions, clamping, thermal or mechanical shocks) that is why they can only be indicated for guidance purposes.
Last news

Exhibition: Progetto fuoco 2020
Tespe will partecipate from  19-02-2020  to  22-02-2020 in VeronaInternational exhibition of...

Learn More

Exhibition: BIE - BIOMASS INNOVATION EXPO 2020
Tespe will partecipate from  17-03-2020  to  20-03-2020 in MilanoBIE - Biomass Innovation Expo...

Learn More

 
logo tespe white
Via Pizzo Arera, 44
24060 Chiuduno (BG)
Italia
Phone: +39 035 83 88 64
Fax: +39 035 83 88 65
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Capitale Sociale €105.000 i.v.
R.E.A. 276185
Registro Imprese BG
C.F. e P.I. 02266810163
VAT N° IT02266810163
Privacy Policy  -  Cookie Policy